Product Specifications
Camera 2 Camera /0.3M pixel WDR CMOS digital camera + Optional Camera (0.3M IR)
Resolution 640x480(VGA) 30fps Max. (1ch) / 640x480(VGA) 20fps (2ch)
Recording 24Hr Loop Recording / Manual & Emergency Recording button
Lighting Environment Min. 0.1 Lux
Camera Angle 156°
Camera Rotation Vertical 65°
Display 2.4" TFT Color LCD
GPS Built-in GPS Module (Sirf III)
G-sensor Built-in 3-Axis Sensor(x-y-z)
Storage SD memory card (SDHC compatible 1G~32G)
Audio Recording built-in MIC (One-touch recording)
Voice Announcement Built-in Speaker
Event Recording Before impact 10 sec. / After impact 15/30/45/60 sec.
Power Supply DC 12V ~ 24V Cigar Power
Internal Battery EDLC for Emergency backup
Operation Temperature -20 °C ~ 60 °C
Car Battery Monitoring Supported
Size 111mm * 75mm * 27mm
PC OS Windows XP / VISTA / Windows7
File Protection Password setting
Analyzer Program Dedicated Analyzer (AVI file transformation support)
Option Item 0.3M Pixel IR camera
Others LCD zoom playback (x2/x4)
Part name

What's included 

Installation procedure 
1. Connect the bracket and the main unit.

Connect the attachment bracket with the main unit and push it to the direction 1 to secure the lock to hear the click sound. Move the bracket to direction 2 to release the bracket.
2. Connect the external option camera and the main unit.

Connect the jack of option camera to the ¡°cam¡± port of the main unit. (When connected to the main unit while the main unit is on, the system will reboot to register the option camera and initialize 2 channel recording mode.)
3. Insert SD card into the unit

Insert the SD card as shown in the picture.
When ejecting the SD card from the unit, turn off the main power. When ejecting the SD card from the unit, turn off the main power completely, and then push in the SD card. The SD card will pop out when pushed in.
Use of force or other methods to eject the SD card may defect the SD card.
4. Connect cable and attach on windshield.

Clean the area on the windshield where the unit will be installed.
For the placement of the unit, it is better to place the unit closer to the center of the vehicle. If the unit is installed on the right side of the back mirror, make sure there is room to detach the unit if needed.
Also be aware of window tinting or other window coatings/shielding which may affect camera visibility.
The adhesive on the bracket is very strong. Partially remove the cover of the adhesive, and then use the full adhesive surface area for final installation.
5. Connect to power source and turn on the unit

Insert the cigarette jack into an appropriate outlet then turn on the engine. When the power is on, the LEDs and the LCD will turn on and a voice notification will be announced.
Blinking of LED lamps notifies that the system booting has succeeded.
DO NOT turn off the power source while the system boot is in progress. This may damage the product.
6. Adjust the camera angle

Move the camera top to bottom to fix it to a recordable position while checking the LCD.
For better images and operation of the analysis program, ensure that the horizon meets 1/2 of the screen in the recorded data.
When the unit is attached, set the camera to face the front direction of the vehicle.
Camera is adjustable and can be rotated 65 degrees to cover desired recording areas.
7. Check LED lamps

The GPS lamp is red when the GPS signal is not received and blue when it is received.
The GPS connection may take a couple of seconds to several minutes, depending on the location of your vehicle.
The REC lamp is blue when it is recording. It is blue when it is recording a (NORMAL) file and red when recording an (EVENT) file after an impact or if the SHOT button has been pressed.
8. Arrange wires

Use the enclosed wire holders to organize the cable line.

 

Home | Product | Gallery | Support | Contact Us | Buy
Copyright 2009 by Carblackboxstore.com. All Rights Reserved.